| Name: Surface_Geometry_Start_Stop | Version Id: 1.0.0.0 | ||
|---|---|---|---|
| Description:The Surface_Geometry_Start_Stop class contains attributes providing surface geometry parameters given as pairs corresponding to the beginning and end of the observation. For a parameter, if either the start or stop parameter is given, both must be provided. If any values from this class are included in the label, the parameters geometry_start_time_utc and geometry_stop_time_utc must be given in the enclosing Geometry_Orbiter class. | |||
| Namespace Id: geom | Steward: geo | Role: concrete | Status: Active |
| Class Hierarchy: Surface_Geometry_Start_Stop | |||
| Attribute(s) | Name | Cardinality | Value |
| lat_long_method | 0..1 | Center, Mean, Median | |
| start_latitude | 0..1 | None | |
| stop_latitude | 0..1 | None | |
| start_longitude | 0..1 | None | |
| stop_longitude | 0..1 | None | |
| start_subsolar_azimuth | 0..1 | None | |
| stop_subsolar_azimuth | 0..1 | None | |
| start_subsolar_latitude | 0..1 | None | |
| stop_subsolar_latitude | 0..1 | None | |
| start_subsolar_longitude | 0..1 | None | |
| stop_subsolar_longitude | 0..1 | None | |
| start_subspacecraft_azimuth | 0..1 | None | |
| stop_subspacecraft_azimuth | 0..1 | None | |
| start_subspacecraft_latitude | 0..1 | None | |
| stop_subspacecraft_latitude | 0..1 | None | |
| start_subspacecraft_longitude | 0..1 | None | |
| stop_subspacecraft_longitude | 0..1 | None | |
| No Associations | |||
| Referenced from: Surface_Geometry | |||